Lexmark C746x, 41G0100, 41H0000, 41G0050, C748x manual Paper jams, Paper jam in the fuser area

Clearing jams 209

4Close the printer top access cover, and then close the front door.

5Depending on your printer model, touch Continue, jam cleared or press .

202–203 paper jams

If the jammed paper is visible in the standard exit bin, then firmly grasp the paper on each side, and then gently pull it out.

Note: Make sure all paper fragments are removed.

Paper jam in the fuser area

1Open the front door.

Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the front doors open for more than 10 minutes.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

2Open the printer top access cover.

3Determine where the jammed paper is located, and then remove it:

aIf the jammed paper is visible under the fuser, then firmly grasp the paper on each side, and then gently pull it out.

Note: Make sure all paper fragments are removed.

bIf the jammed paper is visible at the top paper guide in the fuser assembly, then firmly grasp the paper on each side, and then gently pull it out.

Note: Make sure all paper fragments are removed.