Lexmark 41G0100, 41H0000, 41G0050 manual Paper jam under the photoconductor units, Clearing jams 205

Clearing jams 205

Paper jam under the photoconductor units

1Open the front door.

Warning—Potential Damage: To avoid overexposing the photoconductor units, do not leave the front door open for more than 10 minutes.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

2If lodged under the photoconductor units, then firmly grasp the jammed paper on each side, and then gently pull it out .

3If the jammed paper is lodged too tightly under the photoconductor units, then remove the photoconductor units and place them on a flat surface.

Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print quality of future print jobs.

1

2

4Firmly grasp the jammed paper on each side, then gently pull it out, and then reinstall each photoconductor unit. Note: Make sure all paper fragments are removed.

5Close the front door.

6Depending on your printer model, touch Continue, jam cleared or press .