Lexmark 41G0100, 41H0000, 41G0050 Adjusting Sleep mode, Click Settings General Settings Timeouts

Using C746x 75

Use

On

Off

2Press .

To

Reduce printer noise.

•Print jobs will process at a reduced speed.

•Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed.

•If your printer has faxing capability, then fax sounds are reduced or disabled, including those made by the fax speaker and ringer. The fax is placed in standby mode.

•The alarm control and cartridge alarm sounds are turned off.

•The printer will ignore the Advance Start command.

Use factory default settings. This setting supports the performance specifications of the printer.

Note: Selecting Photo from the printer driver may disable Quiet Mode and provide better print quality and full speed printing.

Adjusting Sleep mode

To save energy, decrease the number of minutes the printer waits before it enters Sleep mode. Available settings range from 1–180 minutes. The factory default setting is 30 minutes.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address in the TCP/IP section in the Network/Reports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings > Timeouts.

3In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.

4Click Submit.

Using the printer control panel

1From the printer control panel, navigate to:

> Settings > Settings > > General Settings > > Timeouts > > Sleep Mode >

2Press the left or right arrow button to select the number of minutes you want the printer to wait before it enters Sleep mode.

3Press .