Lexmark 41G0100, 41H0000, 41G0050, C748x, C746x manual TCP/IP menu, Understanding printer menus 150

Understanding printer menus		150
	Use	To
	Job Timeout	Set the amount of time it takes for a network print job to be canceled.
	0, 10–255 seconds	Notes:
		• 90 seconds is the factory default setting.
		• A setting value of 0 disables the timeout.
		• If a value of 1–9 is selected, then the setting is saved as 10.
	Banner Page	Allow the printer to print a banner page.
	Off	Note: Off is the factory default setting.
	On

TCP/IP menu

Note: This menu is available only in network models or printers attached to print servers. To access the menu, navigate to any of the following:

•Network/Ports > Standard Network > Standard Network Setup >TCP/IP

•Network/Ports > Network [x] > Network [x] Setup >TCP/IP

Use	To
Activate	Activate or deactivate TCP/IP.
On	Note: On is the factory default setting.
Off
Set Hostname	Set the current TCP/IP host name.
	Note: This can be changed only from the Embedded Web Server.
IP Address	View or change the current TCP/IP address.
	Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
	settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
	support BOOTP and RARP.
Netmask	View or change the current TCP/IP netmask.
Gateway	View or change the current TCP/IP gateway.
Enable DHCP	Specify the DHCP address and parameter assignment setting.
On	Note: On is the factory default setting.
Off
Enable RARP	Specify the RARP address assignment setting.
On	Note: On is the factory default setting.
Off
Enable BOOTP	Specify the BOOTP address assignment setting.
On	Note: On is the factory default setting.
Off
Enable Auto IP	Specify the Zero Configuration Networking setting.
Yes	Note: Yes is the factory default setting.
No