Lexmark 41G0050, 41G0100, 41H0000, C748x, C746x manual Printer configurations

Using C748x			82
3		Left side	150 mm (5.9 in.)
	4	Rear	100 mm (3.9 in.)
5		Top	150 mm (5.9 in.)

Printer configurations

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

You can configure your basic printer by adding up to three 550‑sheet optional drawers and a 2,000‑sheet high‑capacity feeder. A caster base and a spacer are supported in any configurations.

Spacers are nonfunctional trays used to add height to a printer stack. Spacers must be:

•Placed directly on a caster base or table top

•Placed at the bottom of all tray stacks, and cannot be used with an optional 2,000‑sheet high‑capacity drawer. For information on installing a spacer, see the instruction sheet that came with the part.

1

2

3

	4
9	5

6

8

7

1 Standard output bin

2Paper support

3Printer control panel

4Optional 550-sheet specialty media drawer

5Optional 550‑sheet drawer

6Optional 2,000‑sheet high‑capacity feeder

7Caster base

8Standard 550‑sheet drawer (Tray 1)

9 Multipurpose feeder