Lexmark 41G0050, 41G0100, 41H0000, C748x, C746x manual Understanding printer menus 177

Understanding printer menus		177
	Use	To
	Toner Darkness	Lighten or darken the printed output.
	1–5	Notes:
		• 4 is the factory default setting.
		• Selecting a smaller number can help conserve toner.
		• If Print Mode is set to Black Only, then a setting of 5 increases toner density and
		darkness to all print jobs.
		• If Print Mode is set to Color, then a setting of 5 is the same as a setting of 4.
	Enhance Fine Lines	Enable a print mode preferable for files such as architectural drawings, maps, electrical
	On	circuit diagrams, and flow charts.
	Off	Notes:
		• Off is the factory default setting.
		• To set Enhance Fine Lines from the software program, with a document open,
		click File > Print, and then click Properties, Preferences, Options, or Setup.
		• To set Enhance Fine Lines using the Embedded Web Server, type the printer IP
		address in a Web browser.
	Color Saver	Reduce the amount of toner used for graphics and images. The amount of toner used
	On	for text is not reduced.
	Off	Notes:
		• Off is the factory default setting.
		• On overrides Toner Darkness settings.
	RGB Brightness	Adjust brightness in color outputs.
	‑6 to 6	Notes:
		• 0 is the factory default setting.
		• This does not affect files where CMYK color specifications are being used.
	RGB Contrast	Adjust contrast in color outputs.
	0–5	Notes:
		• 0 is the factory default setting.
		• This does not affect files where CMYK color specifications are being used.
	RGB Saturation	Adjust saturation in color outputs.
	0–5	Notes:
		• 0 is the factory default setting.
		• This does not affect files where CMYK color specifications are being used.