Lexmark 41G0050, 41G0100 For Macintosh users, Select Ethernet connection, and then click Continue

Additional printer setup 42

If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type D:\setup.exe > OK

In Windows 7 or earlier

aClick or click Start, and then click Run.

bIn the Start Search or Run dialog, type D:\setup.exe.

cPress Enter or click OK.

Note: D is the letter of your CD or DVD drive.

3Click Install, and then follow the instructions on the computer screen.

Note: To configure the printer using a static IP address, IPv6, or scripts, select Advanced Options > Administrator Tools.

4Select Ethernet connection, and then click Continue.

5Attach the Ethernet cable when instructed to do so.

6Select the printer from the list, and then click Continue.

Note: If the configured printer does not appear in the list, then click Modify Search.

7Follow the instructions on the computer screen.

For Macintosh users

1Allow the network DHCP server to assign an IP address to the printer.

2Obtain the printer IP address either:

•From the printer control panel

•From the TCP/IP section in the Network/Ports menu

•By printing a network setup page or menu settings page, and then finding the TCP/IP section

Note: You will need the IP address if you are configuring access for computers on a different subnet than the printer.

3Install the printer driver on the computer.

aDouble‑click the installer package for the printer.

bFollow the instructions on the computer screen.

cSelect a destination, and then click Continue.

dFrom the Easy Install screen, click Install.

eType the user password, and then click OK.

All the necessary applications are installed on the computer.

fClick Close when the installation is complete.

4Add the printer.

•For IP printing: