Additional printer setup

27

cInstall the printer hard disk onto the ISP:

1Hold the edges of the printed circuit board assembly, and then align the standoffs of the printer hard disk to the holes in the ISP.

2Press down on the printer hard disk until the standoffs are in place.

Warning—Potential Damage: Do not press on the center of the printer hard disk. Doing so may cause damage to the hard disk.

dInsert the plug of the printer hard disk interface cable into the receptacle of the ISP. Note: The plugs and receptacles are colorcoded.

Page 27
Image 27
Lexmark 41G0050, 41G0100, 41H0000, C748x, C746x manual