QUICKSTART GUIDE (ENGLISH)

BOX CONTENTS

Please make sure the following items can be located in the box:

PerformancePad Pro

Power Adapter (12V DC 500mA)

Quickstart Manual

Reference Manual

Safety and Warranty Information

READ THE SAFETY AND WARRANTY INFORMATION BOOKLET BEFORE USING THIS PRODUCT!

CONNECTION DIAGRAM

1

2

4

3

As you hook up the PerformancePad Pro, the volume control on your power amp and the PerformancePad Pro should be all the way down, and power to both units should be off.

1.Plug ¼” TS cables from the MAIN OUTPUTS to an amplifier, mixer, or speakesystem. For mono sound, you can connect only one output.

2.Alternatively, you can connect a pair of ¼” TRS headphones to the PHONES OUTPUT.

3.If you have 1/4" TS footswitches, connect them to the Hi-Hat and Kick jacks.

4.Plug the included power adapter (12V DC 500mA) into the adapter jack and the adapter into a power source.

5.Press the POWER switch to turn on the unit.

6.Tap the pads to hear sounds. You can switch among the three different sound categories for the pads by pressing the corresponding button (DRUMS, PERC, BASS).

7.Adjust the volume control on the rear panel to a suitable listening level.

3

Page 3
Image 3
Alesis PERFORMANCE PAD PRO quick start BOX Contents, Connection Diagram