Lexmark C746x Not enough free space in flash memory for resources, Unformatted flash detected

Troubleshooting 224

52 Not enough free space in flash memory for resources

Try one or more of the following:

•Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm.

Downloaded fonts and macros not previously stored in flash memory are deleted.

•Delete fonts, macros, and other data stored in flash memory.

•Upgrade to a larger capacity flash memory card.

53 Unformatted flash detected

Try one or more of the following:

•Select Continue to stop the defragment operation and continue printing. For non‑touch‑screen printer models,

press to confirm.

•Format the flash memory. If the error message remains, then the flash memory may be defective and may need to be replaced.

54 Network [x] software error

Try one or more of the following:

•Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

•Turn the printer off, wait for about 10 seconds, and then turn the printer back on.

•Upgrade (flash) the network firmware in the printer. For more information, contact customer support.

54 Serial option [x] error

Try one or more of the following:

•Check that the serial cable is connected properly and is the correct one for the serial port.

•Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and on the computer.

•Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

•Turn the printer power off, and then turn it back on.

54 Standard network software error

Try one or more of the following:

•Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

•Turn the printer off, and then turn it back on.

•Upgrade (flash) the network firmware in the printer or print server. For more information, contact customer support.