Additional printer setup

21

4Push the card firmly into place.

Warning—Potential Damage: Be careful not to damage the connectors.

Note: The entire length of the connector on the card must touch and be flush against the system board.

5Reattach the system board cover.

Note: When the printer software and any options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs. For more information, see “Updating available options in the printer driver” on page 34.

Page 21
Image 21
Lexmark 41H0000, 41G0100, 41G0050, C748x, C746x manual