Lexmark 41G0100, 41H0000, C746x Using C748x 118, Settings General Settings Timeouts Sleep Mode

Using C748x 118

Adjusting Sleep mode

To save energy, decrease the number of minutes the printer waits before it enters Sleep mode. Available settings range from 1–180 minutes. The factory default setting is 30 minutes.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings > Timeouts.

3In the Sleep Mode field, enter the number of minutes you want for the printer to wait before it enters Sleep Mode.

4Click Submit.

Using the printer control panel

1From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2In the Sleep Mode field, select the number of minutes you want for the printer to wait before it enters Sleep Mode.

3Touch .

Using Hibernate Mode

Hibernate is an ultra‑low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely.

Note: The Hibernate and Sleep modes can be scheduled.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings > Sleep Button Settings.

3From the Press Sleep Button or Press and Hold Sleep Button drop‑down menu, select Hibernate.

4Click Submit.