Lexmark 41H0000, C748x Configuration change, some held jobs were not restored, Input config error

Troubleshooting 226

57 Configuration change, some held jobs were not restored

Something has changed in the printer to invalidate the held jobs. Possible changes include:

•The printer firmware has been updated.

•Paper input options needed for the print job were removed.

•The print job was created using data from a device in the USB port and the device is no longer in the USB port.

•The printer hard disk contains print jobs that were stored while installed in a different printer model.

Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

58 Input config error

1Turn the printer off.

2Unplug the power cord from the wall outlet.

3Check if all tray configurations are correct. Remove unnecessary trays if needed.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.

58 Too many disks installed

1Turn the printer off.

2Unplug the power cord from the wall outlet.

3Remove the excess disks.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.

58 Too many flash options installed

Try one or more of the following:

•Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

•Remove extra flash options:

1Turn off the printer.

2Unplug the power cord from the wall outlet.

3Remove the excess flash memory.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.