Troubleshooting

254

The printed page appears tinted. Can I adjust the color?

Sometimes a printed page may appear tinted (for example, everything printed seems to be too red). This can be caused by environmental conditions, paper type, lighting conditions, or user preference. In these instances, adjust the Color Balance setting to create a more preferable color. Color Balance provides the user with the ability to make subtle adjustments to the amount of toner being used in each color plane. Selecting positive or negative values for cyan, magenta, yellow, and black (from the Color Balance menu) will slightly increase or decrease the amount of toner used for the chosen color. For example, if a printed page has a red tint, then decreasing both magenta and yellow could potentially improve the color balance.

My color transparencies seem dark when they are projected. Is there anything I can do to improve the color?

This problem most commonly occurs when projecting transparencies with reflective overhead projectors. To obtain the highest projected color quality, transmissive overhead projectors are recommended. If a reflective projector must be used, then adjusting the Toner Darkness setting to 1, 2, or 3 will lighten the transparency. Make sure to print on the recommended type of color transparencies.

What is manual color correction?

When manual color correction is enabled, the printer employs userselected color conversion tables to process objects. However, Color Correction must be set to Manual, or no userdefined color conversion will be implemented. Manual color correction settings are specific to the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software program (RGB or CMYK combinations).

Notes:

Manual color correction is not useful if the software program does not specify colors with RGB or CMYK combinations. It is also not effective in situations in which the software program or the computer operating system controls the adjustment of colors.

The color conversion tables—applied to each object when Color Correction is set to Auto—generate preferred colors for the majority of documents.

To manually apply a different color conversion table:

1From the Quality menu, select Color Correction, and then select Manual.

2From the Quality menu, select Manual Color, and then select the appropriate color conversion table for the affected object type.

Manual Color menu

Object type

RGB Image

RGB Text

RGB Graphics

Color conversion tables

Vivid—Produces brighter, more saturated colors and may be applied to all incoming color formats.

sRGB Display—Produces an output that approximates the colors displayed on a computer monitor. Black toner usage is optimized for printing photographs.

Display—TrueBlack—Produces an output that approximates the colors displayed on a computer monitor. Uses only black toner to create all levels of neutral gray.

sRGB Vivid—Provides an increased color saturation for the sRGB Display color correction. Black usage is optimized for printing business graphics.

Off—No color correction is implemented.

Page 254
Image 254
Lexmark C746x, 41G0100, C748x Manual Color menu, Troubleshooting 254, Printed page appears tinted. Can I adjust the color?