Additional printer setup

30

Removing a printer hard disk

Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors.

1Access the system board.

For more information, see “Accessing the system board” on page 16. Note: This task requires a flathead screwdriver.

2Unplug the printer hard disk interface cable from the system board, leaving the cable attached to the printer hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling the cable out.

3Remove the screws that connect the printer hard disk to the system board cage.

Page 30
Image 30
Lexmark 41G0100, 41H0000, 41G0050, C748x, C746x manual Removing a printer hard disk, Additional printer setup