Lexmark 41G0050, 41G0100, 41H0000, C748x manual Printing in black and white, Adjusting toner darkness

Using C746x 67

bCustomize the settings in the Page Setup dialog if necessary:

1With a document open, choose File > Print.

If necessary, click the disclosure triangle to see more options.

2From the Print dialog and pop‑up menus adjust the settings if necessary.

Note: To print on a specific paper type, adjust the paper type setting to match the paper loaded, or select the appropriate tray or feeder.

3Click Print.

Printing in black and white

From the printer control panel, navigate to:

> Settings > Settings > Print Settings > Quality Menu > Print Mode > Black Only >

Adjusting toner darkness

1Open a Web browser, and then type the IP address of the printer in the address field.

Notes:

•View the printer IP address in the TCP/IP section in the Network/Reports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > Print Settings > Quality Menu > Toner Darkness.

3Adjust the toner darkness setting.

4Click Submit.

Using Max Speed and Max Yield

The Max Speed and Max Yield settings let you choose between a faster print speed or a higher toner yield. Max Yield is the factory default setting.

•Max Speed—This lets you print in either black or color depending on what is set in the printer driver. The printer prints in color unless Black Only is selected in the printer driver.

•Max Yield—This lets you switch from black to color based on the color content found on each page. Frequent color mode switching can result in slower printing if the content of pages is mixed.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address in the TCP/IP section in the Network/Reports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > Print Settings > Setup Menu.