Lexmark 41G0050 Too many trays attached, Incompatible tray, Remove defective disk, Disk full

Troubleshooting 227

58 Too many trays attached

1Turn the printer off.

2Unplug the power cord from the wall outlet.

Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down.

3Remove the additional trays.

4Connect the power cord to a properly grounded outlet.

5Turn the printer back on.

59 Incompatible tray [x]

Only options designed specifically for this printer are supported.

Try one or more of the following:

•Remove the specified tray.

•Select Continue to clear the message and continue printing without using the specified tray. For non‑touch‑screen

printer models, press to confirm.

61 Remove defective disk

Try one or more of the following:

•Remove the defective printer hard disk.

•Install a different printer hard disk before performing any operations that require a printer hard disk.

62 Disk full

Try one or more of the following:

•Select Continue to clear the message and continue processing. For non‑touch‑screen printer models, press to confirm.

•Delete fonts, macros, and other data stored in the printer hard disk.

•Install a printer hard disk with larger capacity.

80.xx Fuser near life warning

1Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part.

2Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm.