15
English
Connections
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and ante nna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button. Plug & Play is available only when the Input Source is set to TV.
✎
Before turning on the TV, make sure the antenna ca ble is connected.
✎
To return to the previous step, press the Red button.
1Selecting a language Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the desired OSD (On Screen Display) language.
P
POWER
2Selecting Store Demo
or Home Use
Press the ◄ or ► button, then press the ENTER
E
button.
ySelect the Home Use mode. Store Demo Mode is for retail
environments.
yTo return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold MENU for 5 sec.
yStore Demo is only for shop display. If you select it, several
functions are not able to use. Please select Home Use when you
watch at home.
3Selecting a country Press the
u
or
d
button, then press the ENTER
E
button. Select the appropriate
country.
✎
After selecting the country i n the Country menu, some mod els may proceed with an
additional option to setup the pin numbe r. When you input the PIN number, “0-0-0- 0”
is not available.
4Setting the
Clock Mode
Set the Clock Mode automatically or manually.
5Selecting an antenna Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the Antenna source to memorise.
6Selecting a channel Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel → Auto Tuning (p. 24).
7Enjoy your TV. Press the ENTER
E
button.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”
(France: “1-1-1-1”). If you want to change the PIN number, use the Change PIN function.
You should do Plug & Play (MENU → System) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control b uttons in the following seque nce in Standby mode, which resets
the PIN to “0-0-0-0”(France: “1-1-1-1”): POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).
ANT OUT
Connections