30
English
Basic Features
■SPDIF Output: SPDIF (Sony Philips Digital InterFace)
is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a
DVD player.
Audio Format: You can select the Digital Audio output
(SPDIF) format.
✎
The available Digital Audio outp ut (SPDIF) format
may differ depending on the inp ut source.
Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
■Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
Select Line to obtain dynamic sou nd, and RF
to reduce the difference betwee n loud and soft
sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Speaker Settings
■Speaker Select (External Speaker / TV Speaker): A
sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver.
In this case, set the TV to External Speaker.
✎
When Speaker Select is set to Ex ternal
Speaker, the volume and MUTE buttons will not
operate and the sound settings will b e limited.
✎
When Speaker Select is set to Ex ternal
Speaker.
x
TV Speaker: Off, Externa l Speaker: On
✎
When Speaker Select is set to TV S peaker.
x
TV Speaker: On, External S peaker: On
✎
If there is no video signal, both speake rs will be
mute.
■Auto Volume (Off / Normal / Night): To equalize the
volume level on each channel, set to Normal.
Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Reset Sound (OK / Cancel)
Reset all sound settings to the factory defaults.
¦Selecting the Sound Mode
When you set to Dual
fg
, the current
sound mode is displayed on the screen.
Audio
Type Dual
f
-
g
Default
A2
Stereo
Mono Mono Automatic
change
Stereo Stereo ↔ Mono
Dual Dual
f
↔ Dual
g
Dual
f
NICAM
Stereo
Mono Mono Automatic
change
Stereo Mono ↔ Stereo
Dual Mono ↔ Dual
f
Dual
g
Dual
f
✎
If the Stereo signal is weak and an automatic switch ing,
occurs, then switch to the Mono.
✎
Only activated in stereo sound signal.
✎
Only available when the input Sou rce is set to TV.
System Menu
¦Setting the Time
O
MENU
m
→ System → ENTER
E
Time
■Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the INFO button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
x
Auto: Set the current time automatically us ing the
time from a digital channel.
✎
The antenna must be connected in ord er to set
the time automatically.
x
Manual: Set the current time manual ly.
✎
Depending on the broadcast statio n and signal,
the auto time set up may not be correct. In this
case, set the time manually.
DUALf-g