Basic Features

¦¦ Adjusting Picture Settings

OO MENUm→ Picture → ENTERE

Samsung MagicAngle

This feature allows you to see optimal screen quality according to your viewing position. When viewing the screen at an angle from below, above or the side of the product, by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front.

■■ Off: Select when viewing from the front position.

■■ Lean back mode: Select when viewing from a slightly lower position.

■■ Standing Mode: Select when viewing from the upper position.

When Samsung MagicAngle is set to Lean back mode or Standing Mode, Gamma is not available.

Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)

Your television has several setting options for picture quality control.

NOTE

xx In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R) function is not available.

xx In PC mode, you can only make changes to Backlight, Contrast , Brightness and Sharpness.

xx Settings can be adjusted and stored for each external device connected to the TV.

xx Lowering picture brightness reduces power consumption.

Screen Adjustment

 

■■ Picture Size: Your cable box / satellite

P.SIZE

receiver may have its own set of screen

 

sizes as well. However, we highly

 

recommend you use 16:9 mode most of

 

the time.

 

Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.

16:9: Sets the picture to 16:9 wide mode.

Wide Zoom: Magnifies the picture size more than 4:3. Adjusts the Position by using u / dbuttons.

Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.

Adjusts the Zoom or Position by using u / d button.

4:3: Sets the picture to basic (4:3) mode.

Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.

Adjusts the Position by using u / d / l/ r button.

NOTE

xx Depending on the input source, the picture size options may vary.

xx The available items may differ depending on the selected mode.

xx In PC mode, only 16:9 and 4:3 modes can be adjusted.

xx Settings can be adjusted and stored for each external device connected to an input on the TV.

xx If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function.

■■ 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.

Not available in PC, Component or HDMI mode.

English 26

Page 26
Image 26
Samsung TA550, TA350 user manual Samsung MagicAngle, Screen Adjustment, Adjusting Picture Settings