Bang & Olufsen Guide to Setting Up Your BeoLink System for Optimal Viewing Experience

Models: BeoVision 9

1 68
Download 68 pages 33.09 Kb
Page 22
Image 22

20

Connect and set up a BeoLink system

Connect and set up a BeoLink system to see pictures and hear sound in link rooms. You can, for example, connect the living room TV to another video system or to a set of speakers in another room.

Make link connections

To distribute video signals to link rooms, it is necessary to connect an RF Link Amplifier to the main room TV and a link room TV.*1

 

MASTER

 

LINK

TV

LINK TV

RF Link

Amplifier

Connect the Master Link cable to the available socket marked MASTER LINK on the TV.

To distribute video signals to link rooms, connect an ordinary aerial cable to the socket marked LINK TV on the main connection panel. Then run the aerial cable to the RF Link Amplifier and the Master Link cable to the link room. Follow the instructions enclosed with the link room equipment.

Switch on the system modulator

If you have an audio setup, such as a BeoLink Active/Passive, and you set up a non-linkable TV in the same room, you must set the system modulator to ‘ON’. The factory setting is ‘AUTO’, which must be used if you are using a linkable Bang & Olufsen TV.

Change the link frequency

If, e.g., a TV channel in your area is broadcasted on the same frequency as the factory setting for the BeoLink system; 599 MHz, you must tune the system modulator to an unoccupied frequency.*2

Select ‘OPTIONS’ in

 

Select ‘LINK’ in

 

Select

 

 

 

 

‘CONNECTIONS‘

 

 

 

 

‘TV SETUP’ menu

 

 

‘MODULATOR’

Reveal ‘ON’ Accept

 

menu

 

 

 

 

 

 

 

 

Select ‘OPTIONS’ in

 

Select ‘LINK’ in

 

Select

 

 

 

‘CONNECTIONS‘

 

 

 

‘TV SETUP’ menu

 

 

‘FREQUENCY’

Find unused Accept

 

menu

 

 

 

 

 

frequency

 

 

 

 

 

Useful hints

1*Connected If an audio system is already connected to the MASTER LINK socket and equipment you wish to connect more equipment, the Master Link cable must be

split in two and joined with the cable from the link room using a special junction box. Contact your Bang & Olufsen retailer for assistance.

2*Link frequency When you change the link frequency in the main room TV, make sure that the link frequency in the link room corresponds to it.

NOTE! Only sources with an analogue signal can be distributed from a main room TV to the link room system.

Page 22
Image 22
Bang & Olufsen BeoVision 9 manual Make link connections, Switch on the system modulator, Change the link frequency