Bang & Olufsen BeoVision 9 manual First-time setup of your television, Make settings

52 First-time setup of your television

This first-time setup procedure is activated when the TV is connected to the mains and switched on for the first time. If you want to change your setup at a later date, you can access the same menus and update your settings.

Switch on the TV	TV
It takes the TV approx. 20 seconds to start up and	Switch on
become ready for use.

Make settings

You are led through the following settings only when you switch on the TV for the first time.*1

Select setting	Accept and go to next menu item
MENU LANGUAGE	Set the on-screen menu language
TUNER SETUP	Disable or enable internal TV tuner or DVB
CONNECTIONS	Register connected equipment, see p. 47
AUTO TUNING	Tune in TV channels automatically, see also p. 34. Available only if
	the TV tuner is enabled, see p. 38

Information

Menu language Select the language for on-screen menus.

TV tuner The ‘TUNING’ menu is only available if the TV tuner is enabled, see pp. 38 and 58.

Connections Select the type of equipment connected to each socket, the sockets used, the product name, and the source name.

Auto tuning A menu for channel tuning automatically appears on the screen.

1*NOTE! When you have made the preferred settings in a menu, you may have to press the green button to continue to the next menu in the first-time setup procedure. Follow on-screen instructions.