RCA L22HD41V, L26HD31R, L26HD41 Removing the Table Stand, Mounting Your TV to the Wall, Step

Removing the Table Stand

Your TV comes with the table stand attached. If you want to mount your TV to the wall, remove the table stand by following the instructions below.

Step 1

Place the plastic bag off the TV and place it on a table or other flat surface. Place the TV set face down on the TV bag.

Step 3 (Only for models L22HD41/L22HD41V) Attach the stand cap to the TV cabinet.

TV cabinet with stand cap attached.

Step 2

Remove the table stand from the TV cabinet. Use a screwdriver to remove the four M4 ST-screws.

(Note: there are five M4 ST-screws for models L26HD41 /L26HD31R).

1

Step 3 (Only for model L26HD41 /L26HD31R)

Attach the stand cap to the TV cabinet using a M3 ST-screw and a screwdriver.

TV cabinet with stand cap attached.

Mounting Your TV to the Wall

To mount your TV to the wall, purchase a VESA wall

Models L22HD41/L22HD41V/L26HD41/ L26HD31R Purchase a VESA 100 x100, Size M4 screw

The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 100x100 refers to fact that the mounting measurements are 100mm horizontally and 100mm vertically. Follow the directions included with the wall mount to mount the TV to the wall.

Caution: Your wall mount must be able to bear a minimum of five times the TVÕs net weight to avoid causing damage.

Connections and Setup Chapter 1

7