Chapter 2: Overview
| Table |
|
|
Number Component | Description |
|
|
Function Key — ALL | Disables (mute) video on all destinations OR selects the same source to all destinations. |
| |
| Option 1: Press ALL followed by the OFF button. The display will show “0,” indicating that all destinations |
9 | have no video selected. |
| |
| Option 2: Press ALL followed by Source 1 through 8. The display will show the source selected. |
| Press ENTER and the preset source selection will be assigned to all destinations. |
Function Key — OFF
10
Disables (mutes) video to selected channels.
•Press the OFF button followed by any destination channel.
•Press button 1 through 8 to select the output destination. The display will show “0” for the selected channel indicating no video selected.
11 | Function Key – ENTER | Press the ENTER key to confirm entries. | |
|
|
| |
12 | Input Status Display | Input source 1 to 8 LED lights blue to indicate that a video source is present on that input. | |
|
|
| |
13 | IR Sensor | The IR sensor receives IR commands from the supplied remote control or | |
|
|
| |
|
| Separate outputs 1 through 8 select buttons are provided for each destination assignment. Routing can | |
14 | Destination Select Buttons | be source to destination or one source to multiple destinations. | |
Example: Press Destination 1, 3, 5, then press Source 2. The switch will route Input 12 to Output 1, 3, | |||
|
| ||
|
| 5, respectively. | |
|
|
| |
15 (not | 19" rackmount brackets | Brackets included to install the switch in a 19" rack. (Brackets not shown in Figure | |
shown) | the sides of the switch.) | ||
| |||
|
|
|
Page 12 |