Taylor Pool Heat Pump owner manual Error Code List, Symptom, Probable Cause, Solution

ERROR CODE LIST

CODE	SYMPTOM	PROBABLE CAUSE	SOLUTION
	Open-Circuit in evaporator		Reset the heat pump from the
DSO	temperature sensor	The evaporator temperature sensor	breaker
		is incorrectly plugged in or defective
	Heat pump stopped		Call an authorized technician
	Open-Circuit in water		Reset the heat pump from the
SO	temperature sensor	The water temperature sensor is	breaker
		incorrectly plugged or defective
	Heat pump stopped		Call an authorized technician
	Short circuit in evaporator		Reset the heat pump from the
DSc	temperature sensor	The evaporator temperature sensor	breaker
		is incorrectly plugged in or defective
	Heat pump stopped		Call an authorized technician
	Short circuit in water		Reset the heat pump from the
Sc	temperature sensor	The water temperature sensor is	breaker
		incorrectly plugged or defective
	Heat pump stopped		Call an authorized technician
			Reset the heat pump from the
			breaker
		Loss of refrigerant	Call an authorized technician
	Low pressure detected in
LP	circuits	Defective captor or cable	Call an authorized technician
	Heat pump stopped	Defective fan	Call an authorized technician
		Dirty evaporator	Clean the evaporator
		Defrosting captor is defective	Call an authorized technician
			Reset the heat pump from the
	High pressure detected in		breaker
	circuits
HP		Water flow either slow or blocked	Adjust the water flow
	Working resumption when	by an obstruction
	the pressure becomes
	normal again	Defective captor or cable	Call an authorized technician
		Water flow either slow or blocked	Adjust the water flow
	4 high pressures detected	by an obstruction	Clean pool filter
HP4	in circuits		Reset the heat pump from the
			breaker
	Heat pump stopped
		Defective captor	Call an authorized technician

22