Chapter 6: Ethernet Serial Interface
6. Ethernet Serial Interface
Connect a PC to Control System, Version Compatible V2.0
NOTE: For a complete list of commands, refer to the extended Serial Protocol Instruction Manual.
Table
Pin | Ethernet | Definition |
|
|
|
1 | TXOP | TX+ |
|
|
|
2 | TXON | TX- |
|
|
|
3 | RXIP | RX+ |
|
|
|
4 | — | Not used |
|
|
|
5 | — | Not used |
|
|
|
6 | RXIN | RX- |
|
|
|
7 | — | Not used |
|
|
|
8 | GND | Ground |
Figure
Ethernet TCP/IP Protocol Commands
The switch can be controlled via the TCP/IP serial control port connected to a PC, or similar
The serial communication parameters are 9600 baud, 8 bit, no parity, and 1 stop
Page 28 |