Black Box AVSW-HDMI-RX manual Rear Panel of the AVSW-HDMI8X8-X, Overview, Page

Chapter 2: Overview

2.4.2 Rear Panel of the AVSW-HDMI8X8-X

6 13 14

1

		2	3	4	5	12	7	8	9	10	11
					Figure 2-2. Rear panel.
					Table 2-2. Rear panel components.
Number	Component	Connector			Connector Descripton				Component Description
		HDMI out
					HDMI digital video/audio connector
					with fix screw.	Connect a signal link of HDMI direct digital video/audio to this
1	Outputs 1–8 HDMI				NOTE: With the proper adapters, you	female HDMI connector. The connector supports HDMI digital
						video/audio and DVI digital video sources.
					can use the switch with DVI digital
					video signals. HDCP compliant.
		HDMI in
					HDMI digital video/audio connector
					with fix screw.	Connect a signal link of HDMI direct digital video/audio to this
2	Inputs 1–8 HDMI				NOTE: With the proper adapters, you	female HDMI connector. The connector supports HDMI digital
						video/audio and DVI digital video sources.
					can use the switch with DVI digital
					video signals. HDCP compliant.
		Analog audio in
						Connect an analog audio input when used with DVI digital
3	3.5-mm audio jack				DVI audio	video sources. The audio will be embedded into the HDMI
						signal.
		SPDIF out
					SPDIF: Use RCA connector with
4	Inputs 1–8 audio				HDMI or DVI digital audio signals	Connect SPDIF digital audio output to an audio amplifier.
					output.
		RJ-45 out
5	Outputs 1–8 HDBaseT				HDBaseT output	Connect CAT6/6A/7 to AVSW-HDMI-RX unit for HDBaseT
						extension.

	Remote port:
6	(8) DB9 connectors

RS-232 ports 1–8	DB9 female connector
connections to
control room

Eight RS-232 control ports interface to a PC, such as a computer, or touch panel control, to the switch via this DB9 female conector for serial RS-232 control through the HDBaseT receiver.

724-746-5500 blackbox.com Page 13