Sears 385. 11607 owner manual Set Up the Machine, Prepare the Machine for Sewing

Set Up the Machine

SECTION 2. PREPARE THE MACHINE FOR SEWING

Plug in the Machine and Switch on the Power

Plug

connector / Machine plug

J

NOTE: Before inserting the plug into your

machine, be sure the power sw_tch _s

OFF

1.Check your outlet to be sure it is a110to120 Volt AC outlet.

2.Insert the machine plug Into the three-prong

plug connector, as shown. It will only fit one way.

3.Insert the power supply plug into the outlet.

light

Power __

4.Push the light and power switch to turn on the power and sewing light.

SAFETY FEATURE:

Your machme will not operate unless the

tight/power switch _s turned on, If you are

interrupted or stop sewing, turn off the

light/power switch to prevent injury to children.

= Foot Control Use

¢-

J

/

Foot control

The foot control regulates the speed at which you sew.

To increase speed, gently press down with the ball of your foot.

To decrease speed, release your foot pres- sure slightly.

NOTE:	The	foot	control		is	sensitive		and
	will	increase		or	decrease			your
	sewing		speed			immediately+
	Practice		on a	scrap		of	fabric	to
	regulate		your	sewing			speed	to
	your	taste	and	needs,