PLANET IP PBX user’s manual
|
|
| The usergroup that the extension can pick up. The extension can | |
| Pickup Group |
| set a usergroup that when any extension in the usergroup rings, | |
|
|
| the extension can press *8 to pick up the call in ringing state. | |
| Line Type |
| Specify the type of connection, wired or wireless, of the client with | |
|
| the extension. |
| |
|
|
|
| |
| Language |
| Preferred language for system instructions heard from the | |
|
| extension. |
| |
|
|
|
| |
| Voicemail | Select enable to allocate voicemail account for the extension. | ||
| Voicemail PIN |
| PIN to access voicemails. This is mandatory if above voicemail | |
|
| option is enabled. |
| |
|
|
|
| |
| Unavailable Timeout | Timeout for ringing before a call is answered. | ||
| Allow LAN Use Only |
| Check to reject registration and calls from WAN in a SIP ID same | |
|
| as the extension number. I.e., this extension must be on LAN. | ||
|
|
| ||
|
|
| If click YES, IP PBX will attempt to notify the two peers in a | |
|
|
| conversation to try | |
|
|
| suggested as long as phones support INVITE or UPDATE method | |
| Try |
| during a connected call to save the resource of IP PBX. However, | |
|
|
| only SIP INFO DTMF mode phones should enable this since other | |
|
|
| DTMF modes require IP PBX being RTP relay server to support in- | |
|
|
| line transfer. |
|
|
|
| Choose preferred DTMF mode for this extension. Currently | |
| DTMF Mode |
| supported types include RFC2833, SIP INFO, and | |
|
|
| must match configuration on the device side. | |
| Advanced Settings | Select to see more optional settings shown below. | ||
|
|
| (Optional) Select Block Anonymous Calls to block all calls | |
|
|
| without a Caller ID. |
|
|
|
|
| |
| Selective Call Blocking |
| (Optional) Block one or more calling numbers by entering the | |
|
| calling numbers and clicking | . Removing the blocked | |
|
|
| ||
|
|
| numbers by clicking the number from the list, and then click | |
|
|
| . |
|
|
|
| (Optional) Select Unconditional Call Forward and clicks a default | |
|
|
| destination in the list, e.g. Voicemail or Phone Number. | |
|
|
| ) If selecting Phone Number, enter a number to which incoming | |
| Forward Options |
| calls are forwarded unconditionally. The number could be an | |
|
|
| ||
|
|
| extension or a PSTN number with appropriate outbound | |
|
|
| prefix. |
|
|
|
| ||
| Unavailable Call Forward | (Optional) Enter a number to which incoming calls are forwarded | ||
|
|
|
|
|
