Planet Technology IPX-1800N SIP Domain, User-agent Content, Clear Bindings Prior Registration

PLANET IP PBX user’s manual

	Specify the SIP domain used by the proxy and registrar. If
SIP Domain	not specified, IP address will be used as the domain by
	default.
User-agent Content	Override default User-Agent header content.
Clear Bindings Prior Registration	Select if failed to the registration, and cannot identify any
	abnormal settings.
	IP PBX uses NAT traversal for outgoing traffics by default.
Disable NAT Traversal	Select to disable NAT traversal if there is a machine that
	could handle NAT issues.

4.7ISDN PSTN Trunk Configuration

An ISDN PSTN trunk group is a logical group of one or more ISDN subscriber lines connecting to ISDN ports (RJ45) on PLANET IP PBX. Currently only Basic Rate Interface (BRI) ISDN service is supported. BRI consists of two 64 kb/s B channels and one 16 kb/s D channel for a total of 144 kb/s. This basic service is intended to meet the needs of most individual users.

The ISDN PSTN TRUNK MANAGEMENT page allows the administrator to configure ISDN trunks. Select Trunk -> ISDN PSTN Trunk, and one can add, edit and delete ISDN trunks. Go to Service -> IP PBX Service, and click RELOAD to activate changes.

	1.	Click the Add New tab.
	2.	Enter settings shown in Table 4.7.
Add an ISDN PSTN Trunk	3.	Click ADD to see the newly added ISDN PSTN trunk
		in the Trunk Group.
	The newly added ISDN Trunk shall display in the Trunk
	Group.
	1.	Click the Trunks tab, and More to see more
		information.
Edit an ISDN PSTN Trunk	2.	Enter settings shown in Table 4.7 in a row.
	3.	Click APPLY in the row to update the information.