A-70 Acutime 2000 Synchronization Kit User Guide
Trimble Standard Interface Protocol A
0x5F-11
Report Packet 5F-11

EEPROM Segment Status Reports

This report packet is sent in response to command packet 3F-11. It
contains all the segments in the EEPROM. T he Segment Status is
bitwise encoded with the status of each segment and is cleared to 0
after it is read. A zero in the bit field indicates that the segment
contents are valid. A one in the bit field indicates that the segment
contents were corrupt and had to be reverted to their factory default
values. The Manufacturing and Production parameters (Bits 0, 1) do
not have factory default values.
Table A-59 Report Packet 5F-11 – EEPROM Segment Status Report
Byte Bit Item Type Value Meaning
0 Subcode BYTE 0x11
1-2 0
1
2
3
4
5
6
7
8
9-10
11
12-15
Segment
Status
Bit field
U16
Manufacturing parameters (8F-41)
Production parameters (8F-42)
Receiver configuration
Packet I/O control
Serial port configuration
Timing output configuration
Accurate position
Self-survey configuration
NMEA configuration
(Not Used)
UTC information
(Not used)