2-3 Installing a Wall Mount
Before installation, disassemble the product according to the following steps.
Lift up the monitor stand to the maximum angle with your left hand, and remove the back decoration cover with your right hand, as shown in the figure.
Remove the two screws(A).
Remove the stand arm in the direction shown in the figure.
This product provides a wall mount of 100 mm x 100 mm(200 mm x 100 mm) that complies with the VESA specifications.
100 mm x 100 mm | 200 mm x 100 mm |
A. Wall Mount Base
B. Wall Mount Kit (Optional)
1.Turn the product off and unplug the power cord from the wall outlet.
2.Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down.
Installing the Product |
