3-6 Product Operating Buttons

Product Operating Buttons

The buttons are located on the bottom of the product.

 

 

 

 

 

 

Icon

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU/

Press this button to view the On Screen Display (OSD).

 

 

 

 

 

 

 

 

 

 

 

 

 

This button is also used to exit the OSD or to return to a higher-level OSD menu

 

 

 

 

 

 

 

* Key Lock

 

 

 

 

 

 

 

This function locks the buttons on the front of the product to prevent the current settings from

 

 

 

 

 

 

 

being changed by others.

 

 

 

 

 

 

 

Lock: Press and hold the MENU button for 5 seconds. The key lock mode will be enabled.

 

 

 

 

 

 

 

Unlock: Press and hold the MENU button for 5 seconds when the key lock is enabled. The key

 

 

 

 

 

 

 

lock mode will be disabled.

 

 

 

 

 

 

 

When the key lock mode is enabled, all the buttons on the front of the product are

 

 

 

 

 

 

 

disabled.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the button at least 2sec to connect to the host PC in Client mode. In order to turn the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

host PC off, press the button more than 2 sec, being connected to the host PC.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

▲/▼

Adjust items in the menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When OSD is not on the screen, push the button to adjust volume.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

/SOURCE

Use this button to select a function

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press [ /SOURCE] to select the video signal from a connected device while the OSD is off.

 

 

 

 

 

 

 

(When the [ /SOURCE] button is pressed to change the input mode, a message appears in

 

 

 

 

 

 

 

the upper left of the screen displaying the current mode).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUTO /

In <Analog> mode, this button is used for auto adjustments. In <Client> mode, it is used to dis-

 

 

 

 

 

 

 

 

 

 

 

 

connect from the server.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press this button to turn the product on or off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Speaker

Applicable to the 24-inch model only.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Using the product

3-6

Page 31
Image 31
Samsung NC240 user manual Product Operating Buttons