Trimble Outdoors Part Number 45005-00-ENG manual Set Primary Receiver Configuration

Trimble Standard Interface Protocol A

0xBB Command Packet BB

Set Primary Receiver Configuration

TSIP command packet BB contains the primary receiver configuration parameters.

The Ace UTC and Acutime 2000 store 3 independent sets of configuration parameters. These are designated as the "Mobile", "Survey" and "Timing" configurations.

The active configuration is determined by the survey state:

Table A-67 Survey State Configurations

Survey State	Active Configuration
Survey Disabled	Mobile
Survey Active	Survey
Survey Complete	Timing

When the survey state changes, the receiver automatically switches to the new configuration. Only the active configuration can be programmed.

To program configurations, switch the active configuration by changing to the appropriate survey state using packets 8E-A6 and 8E- A9, update the configuration (BB), and save settings (8E-26).

There are restrictions to the dynamics code and operating dimension settings, which take effect when survey is enabled, ensuring that the receiver performs a valid survey and enters a timing mode afterwards.

The following table shows valid settings for each configuration.

A-78 Acutime 2000 Synchronization Kit User Guide