05/08 Rev. AB |
| OPERATOR’S HANDBOOK | Getting Started |
| |
|
| 9844/9854 |
| ||
|
|
|
|
| |
Configuring the | • | Application A: |
|
|
|
Dispenser |
| The label is dispensed (peeled) so that a small portion still sticks to the |
|
| |
Position |
| backing paper above the dispensing edge. After the dispensed label is |
|
| |
|
| removed, the next label is immediately printed and dispensed. |
|
|
|
|
| Set DISPENSER PARA > Dispenseposition to |
|
| |
|
| material is very adhesive). |
|
|
|
|
| Set DISPENSER PARA > Start Source to Light barrier. |
|
|
|
| • | Application B: |
|
|
|
|
| The printing and dispensing of the label is controlled by the optional foot |
|
| |
|
| switch. |
|
|
|
|
| Set SYSTEM PARAMETER > External Signal to Stacker full. |
|
|
|
|
| Set DISPENSER PARA > Dispenseposition to |
|
| |
|
| material is very adhesive). |
|
|
|
|
| Set DISPENSER PARA > Start Source to Foot switch. |
|
|
|
Label length |
| If using very short labels (< 40 mm) set PRINT PARAMETERS > Material length |
|
| |
< 40 mm |
| < 40 mm (1.6 inches). The printer automatically initializes the material, which |
|
| |
|
| improves the impression accuracy of the printout. |
|
|
|
| P Refer to the |
|
| ||
|
| more information on parameter DISPENSER PARA > Calibration mode. |
|
| |
|
| Offline Operation |
|
|
|
|
| Press the buttons indicated in black to perform the listed functions. |
|
| |
| • | Switching from offline mode to online mode: |
|
|
|
OFFLINE x JOBS
Online
ONLINE x JOBS
•Switch to online mode when the print job is stopped:
OFFLINE | x JOBS |
|
| Online |
Stopped | xx |
|
|
|
|
|
| ||
|
|
|
|
|
•Slow material and ribbon feed:
ONLINE x JOBS
Stopped xx
OFFLINE x JOBS
Online Feed
OFFLINE x JOBS feeding…
•Material travels backwards under the printhead:
OFFLINE x JOBS
•Reset:
OFFLINE x JOBS
Cut Online
Cut Online Feed
OFFLINE x JOBS feeding…
OFFLINE x JOBS
