05/08 Rev. AB | OPERATOR’S HANDBOOK | Setup | |
|
|
|
9844/9854
Loading the 9854 with the
Internal Liner Takeup Reel
1.Follow the steps for loading material from the previous section. Then, follow these steps.
2. Thread the end of the material to the | 1 |
internal liner takeup reel (1) as shown and |
|
secure it with the clip (2) (Fig. 1). |
|
3.Choose the rotation direction of the takeup reel (face inside or outside): Select parameter REWINDER PARA > Rewind direction.
After turning on the printer, the takeup reel rotates slowly until the material is pulled tight.
You may see
Status5004 Rewinder mat. tear
before the material is pulled tight.
If this happens, press Online to clear the message. You may have to press it several times.
