05/08 Rev. AB | OPERATOR’S HANDBOOK | Getting Started |
| |
| 9844/9854 |
| ||
|
|
|
| |
|
|
|
|
|
Using the Printer
Connecting the Printer
WARNING!
Touching live electrical parts causes exposure to hazardous electrical currents that may lead to burns!
Make sure the printer is turned off before connecting the power cable.
Only connect the printer to an electrical outlet that provides the correct volt- age, which can be found on the rating plate.
Only connect the printer to a grounded electrical outlet fitted to authorized standards.
Connect the power cable so that:
–no one trips or steps on it.
–it can be easily unplugged from the power outlet.
1.Turn off the printer. On the back of the printer press (O) to turn off the printer.
2.Connect the printer to the power supply using the cable provided.
3.Using the data cable supplied, connect the Centronics interface on the printer to the host computer.
4.Turn on the printer. On the back of the printer, press (I) to turn on the printer.
Display |
| Description |
System start... | The boot loader has started. | |
|
| |
System start... | Valid firmware recognized, program starts. | |
Start user prog |
| |
Avery | AP 5.4 | Printer type (for example: AP 5.4/9854) |
V 1.02 |
| Version number of the printer firmware. |
|
|
|
Memory: | 8MB | Internal RAM (for example: 8 MB) |
Flashcard: 32MB | Optional RAM on the Compact Flash card (for | |
|
| example: 32 MB) – only displayed when a |
|
| Compact Flash card is in use. |
OFFLINE 0 JOBS | Offline mode | |
|
|
|
Tab. 4: Messages on the display when the printer is turned on.
5. Press Online to switch to the online mode:
ONLINE 0 JOBS
When the parameter SYSTEM PARAMETER >
