05/08 Rev. AB | OPERATOR’S HANDBOOK | Getting Started |
| |
| 9844/9854 |
| ||
|
|
|
| |
|
|
|
|
|
About the 9854 Dispenser (Peel) and Internal Liner
Takeup
The 9854 printer has an internal liner takeup reel, which allows labels to be dispensed (using the dispensing edge) or rewound inside the printer (using the deflector) after printing.
After the printer is turned on, the takeup reel is initialized and the label material is stretched.
If an error occurs, the takeup reel turns off automatically.
When the maximum diameter of the takeup roll is reached, a message appears and the takeup reel turns off automatically.
The following modes of operation are available with the dispenser:
•Dispenser Mode with Dispensing Edge Sensor:
The printed label sticks to the dispensing edge (set dispensing position). Once the label is removed, the next label prints.
•Dispenser Mode with Foot Switch:
Pressing the foot switch triggers the printing and dispensing of one label. The next unprinted label is immediately positioned under the printhead.
PSee “Using the Dispenser” for more information.
