05/08 Rev. AB | OPERATOR’S HANDBOOK |
| 9844/9854 |
Loading Material
WARNING!
Rotating axles! – Keep long hair, loose clothing, jewelry, etc. away from the printer!
Do not operate the printer with the cover open!
Be careful when touching the printhead. It may be hot.
The printer can use both roll and
PSee “Specifications” for more information about the media.
1. Open the cover. | 1 |
2.Release the printhead pressure lever (1).
3.Remove the external guide plate (2) from the material roller.
4.Push the material roll onto the correctly sized adapter disc (3) on the unwinder. Push the guide plate back on.
The material roll turns counter- clockwise when unwinding!
5. Insert the material as shown (Fig. 2). |
| 2 |
| ||
Be sure to thread the material around |
|
|
the material tension roller (4) as well! |
|
|
|
|
|
Setup
