Paxar 9854, 9844 manual Material/Ribbon End, Material Stock End

05/08 Rev. AB	OPERATOR’S HANDBOOK	Setup	2-13
	9844/9854

Material/Ribbon End

Material Stock End

If the material end has passed the material sensor, you see

Status5002 Material end

Release the pressure lever and pull the end of the remaining material from the front side of the printer.

Ribbon End

If the ribbon roll is emptied (the ribbon unwind reel is not turning), you see

Status5008

Ribbon end

See “Loading a Ribbon” to continue.

Ribbon end detection can be turned off for theromodirect printing.

To do so, set the parameter SYSTEM PARAMETERS > Ribbon autoecon. to

Thermal printing.

PRefer to the “Info-Printouts and Parameters” section on your CD-ROM for more information.