Chapter 1
Installation
1.2.2Manual Installation
Procedure
Proceed as follows:
1Connect the cables
2Configure the Thomson Gateway
Connect the cables
Proceed as follows:
1Connect your computer to the Thomson Gateway as described in “3 Adding a New Computer to your Network” on page 19.
2Connect the Thomson Gateway to the DSL line.
3Connect the power supply.
4Turn on the Thomson Gateway.
Configure the Thomson Gateway
1Open your web browser.
2The Thomson Gateway informs you that you have not yet configured your Thomson Gateway.
If this window does not appear browse to http://dsldevice.lan or to the IP address of your Thomson Gateway (by default: 192.168.1.254) and click SpeedTouch on the menu on the
3Click Setup my Thomson Gateway.
4The Easy Setup wizard appears. This wizard will guide you through the configuration of your Thomson Gateway. Click Next and follow the instructions.
8 | |
|
