Chapter 3
Adding a New Computer to your Network
3.1Connecting a Computer Using the Ethernet Cable
Requirements
>Your computer must have a free Ethernet port.
>Your computer must be configured to obtain an IP address automatically. This is the default setting.
Ethernet cable
In your package, you will find a cable with yellow connectors. This is the Ethernet cable.
Procedure
Proceed as follows:
1Connect one end of the Ethernet cable to (one of the) yellow Ethernet port(s) of your Thomson Gateway:
|
| 1 |
|
| 2 | 3 | 4 |
|
|
| ||||||||||
|
| |||||||||||||||||||
| 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
| |
ON/OFF |
| Reset |
|
| Ethernet |
|
|
|
|
|
| DSL | ||||||||
2Connect the other end of the Ethernet cable to your computer.
3Your computer is now connected to your network. No additional configuration is needed.
20 | |
|
