Chapter 1

Installation

1.2.1Guided Installation

Connecting devices: wait!

Do not plug in any cables or connect any devices until you are prompted to do so by the wizard.

In case of problems

If you encounter problems during this installation please refer to “7.1 Setup wizard Troubleshooting” on page 46.

Starting the wizard

To start the wizard:

1Insert the Setup CD into your computer's CD- or DVD-ROM drive.

2If your computer runs:

„Microsoft Windows: The CD should autostart.

„Mac OS X: Double-click Menu in the window with the content of the CD.

3Select the language of your choice and click OK.

4The Setup wizard will now guide you through the installation.

5At the end of the installation, following screen appears:

6Select the Go to the Thomson Gateway Web Interface if you want to go to the Thomson Gateway Web Interface after closing the wizard. On the Thomson Gateway Web Interface, you can further configure your Thomson Gateway.

7Click Finish.

8The CD menu appears.

6

E-DOC-CTC-20080627-0003 v1.0

 

Page 12
Image 12
Technicolor - Thomson ST585 V6 manual Guided Installation, Connecting devices wait, Case of problems, Starting the wizard