Samsung HT-TX25, HT-X20, HT-TX22 Connecting the Speakers Con’t, Speaker Installation

Connecting the Speakers (Con’t)

HT-TX22

Front Speaker (R) Center Speaker Front Speaker (L)

SPEAKER

STAND

Rear Speaker (R) Rear Speaker (L)

	Subwoofer
HT-TX25
	Center Speaker
Front Speaker (R)	Front Speaker (L)
Rear Speaker (R)	Rear Speaker (L)
	Subwoofer

Speaker Installation ENG

With the HT-TX22 front speakers and HT-TX25 front/rear speakers, you have the option of installing the speakers on Stands, or directly to the Stand Base.

Component (HT-TX22/HT-TX25 only)

SPEAKER	STAND	STAND BASE		Screw (A)	Screw (B)	CONNECTIONS
		2	Insert two screws (A) into the two holes marked with arrows
How to Install the Speaker on the Stand
1	2	1	Turn the STAND upside-down and connect it to
			the STAND BASE.
			using a screwdriver as shown in the illustration.
		3	Insert a screw (B), into the hole on the rear of the Speaker
3	4		STAND.
		4	Connect the assembled stand to the SPEAKER.
		5	Insert another screw (B) into the hole on the rear of the
			speaker using a screwdriver as shown in the illustration.
		6	This is the SPEAKER successfully assembled with
5	6		the Stand.

• Make sure that the speaker is installed on a flat and stable area. Otherwise it may be easily knocked over.

How to Install the Speaker on the Stand Base

1	2	1	Connect the SPEAKER with the STAND BASE.
		2	Insert the screw (B) into the hole on the rear of the speaker
			using a screwdriver as shown in the illustration.
		3	This is the SPEAKER successfully assembled with
			the Stand Base.
3

14 15