Installation
Mounting the Base to a Wall Plate
To mount the base on a standard wall plate (Figure 6: Mounting the Base to a Standard Wall Plate):
1.Snap the base onto the
-Make sure the mounting ears fit all the way into their slots and the mounting tabs snap into place.
2.Run a
3.Run the AC adaptor cord in the narrow wire channel as shown and plug it into the base.
4.Plug the other end of the short line cord into the wall plate modular jack.
5.Slide the
Mounting ear
Line cord in wide channel
| AC adaptor cord |
Mounting tab | in narrow channel |
|
Wall Plate
Wall
(Optional) Line out to
DSX Keyset
Figure 6: Mounting the Base to a Standard Wall Plate
To remove the base from the wall:
1.Slide the
2.Unplug the short line cord from the wall plate.
3.Unplug the short line cord and AC adaptor cord from the base.
4.Press the mounting tabs to release the
8 ◆ Chapter 1: Installation | DSX Cordless Lite II Telephone User Guide |