The Basics

Basic Operation

The Basics

Basic Operation

Using the Basic Features

Answering Calls

❥Outside calls: Ring with 2 short rings followed by a long ring.

❥Intercom calls: Ring with 1 long ring.

❥To answer a call: Press TALK or the flashing line key.

-If your handset is in the charger, lifting the handset answers the incoming call.

Placing Calls

❥Intercom calls: Press TALK + Dial co-worker’s extension or *8 for Voice Mail.

❥Outside calls: Press TALK + Dial line access code + Dial outside number, or Press line key + Dial outside number

Hanging Up

❥Press TALK or place the handset in the charger.

Changing Channels

If the installation site has more than one DSX Cordless Lite II Telephone, set up each telephone to operate on its own channel.

❥While on a call, press CH.

-The TALK icon flashes briefly while the handset changes channels. There are 30 channels max.

-If you select a channel that is already in use, you see SYSTEM BUSY.

Standby Mode

❥When the handset is out of the charger, it will go into Standby Mode after about 5 minutes. Standby mode blanks the display to conserve power.

❥Placing or answering a call automatically cancels Standby Mode.

Traveling Out Of Range

❥If you try to place a call while out of range (beyond the range of your handset):

-ACQUIRING LINK flashes in your display.

-You hear five quick beeps.

-NO SERVICE flashes in your display.

❥If you travel out of range while on a call:

-You hear five quick beeps.

-Your handset goes into standby mode.

-The call disconnects.

Using the Base Cordless and Desk Buttons

❥While idle at your cordless handset: Press Desk to switch your extension to your desk keyset.

❥While idle at your desk keyset: Press Cordless to switch your extension to your cordless handset.

❥If you press Desk or Cordless to switch telephones while on a call, the active call will ring the cordless or keyset as soon as the telephone activates.

Low Battery

If the LOW icon displays:

❥If on a call, press TALK to hang up as soon as possible so your call is not interrupted.

❥Recharge or replace the battery before placing or answering another call.

2 ◆ Chapter 1: Installation

DSX Cordless Lite II Telephone User Guide

Page 5 Page 7
Page 6
Image 6
NEC P, N 1093092 manual Basics Basic Operation, Using the Basic Features, Installation
Page 5 Page 7

1093092, N 1093092, P specifications

The NEC P,N 1093092,1093092 is a high-performance electronic component renowned for its versatility and advanced technology. As part of NEC's extensive portfolio, this component is designed to meet the demanding requirements of various industries, including telecommunications, automotive, and consumer electronics.

One of the main features of the NEC P,N 1093092,1093092 is its impressive operational efficiency. This component offers low power consumption without compromising performance, making it an ideal choice for battery-operated devices and energy-sensitive applications. Its ability to function effectively at low voltage levels further enhances its appeal, allowing manufacturers to design smaller, more efficient products.

Another key characteristic of the NEC P,N 1093092,1093092 is its robust reliability and durability. With a temperature range that can withstand extreme conditions, the component ensures consistent performance even in harsh environments. This reliability is critical for applications in sectors like automotive, where components are often subject to vibrations, temperature fluctuations, and other stress factors.

Moreover, the NEC P,N 1093092,1093092 integrates advanced semiconductor technology that enables high frequency and high-speed processing capabilities. This feature makes it suitable for applications requiring fast data transmission, such as in telecommunications infrastructure and data centre operations. As technology continues to evolve, the demand for components that can handle high data rates becomes increasingly important, and the NEC P,N 1093092,1093092 is well-equipped to meet these needs.

In terms of design, the component boasts a compact form factor, which facilitates integration into various hardware configurations. This flexibility allows engineers and designers to utilize the NEC P,N 1093092,1093092 in diverse applications while maintaining space efficiency in device design.

Finally, the NEC P,N 1093092,1093092 complies with international standards, ensuring that it meets the stringent quality requirements set forth for electronic components. This compliance not only enhances the component's reliability but also simplifies the certification process for manufacturers, making it a strategic choice for projects that require adherence to industry regulations.

In summary, the NEC P,N 1093092,1093092 stands out as a cutting-edge electronic component characterized by its operational efficiency, reliability, processing capabilities, compact design, and compliance with quality standards. Its advanced features make it an essential component for modern electronic applications across various industries.
Top Page Image Contents