NEC N 1093092, P manual DSX Cordless Lite II Telephone User Guide, Empowered by Innovation

Empowered by Innovation

– Please Read –

Important DSX Cordless Lite II Telephone Installation Information

DSX Cordless Lite II Telephone Installation Tips

Important

•Only connect the cordless base unit to a DSX-80/160 16ESIU PCB port or a DSX-40 digital station port. Do not plug the base into an analog port or a DS-2000 16DSTU PCB.

•For best results, the base unit should be placed in line-of-site with its handset.

•Cordless telephone range and reception can vary from site to site. Some of the things that may adversely affect range and reception are:

-Placing the base against or close to a wall (particularly if the wall has metal studs).

-Positioning the base close to a device that emits Electromagnetic Interference (EMI), such as a TV, radio, computer, fluorescent light, fax machine, or printer.

-Installing the base close to other 900 Mhz devices, such as Symbol or Telex hand-held inventory devices.

-Installing the base above a ceiling that uses foil-backed insulation.

-Installing the base behind a door which can be closed, tinted windows, or one-way glass which will separate the base from the handset.

•Always raise the base unit antenna to its full vertical position.

•When installing more than one cordless telephone in the same site:

-Be sure the base units are at least 15 feet apart.

-Do not install more than 12 cordless telephones in an area of close proximity.

-After installation, change each telephone’s channel by pressing CH on the handset. This will minimize interference between your cordless telephones. There are 30 available channels.

•The handset must charge 5-8 hours in its charger prior to initial use.

•The Nickel Metal Hydride Rechargeable Battery Pack is recyclable. If you replace a battery pack, always dispose of the old pack along with your other recyclable materials.

1

2

DSX Cordless Lite II Telephone User Guide

P/N 1093092

Rev 2, June 2006

Printed in U.S.A.

01.00.00