Nokia 6010 Existing voice command, Audible Alerts, Play Back, Change, Delete, One Beep, Three

6010.ENv1_9311233_121903.book Page 47 Tuesday, December 30, 2003 6:16 PM

Voice features

Existing voice command

After you have associated a voice tag to a command, you can either play back, change or delete the tag.

PLAY BACK

1Select Menu > Extras > Voice commands > Audible alerts and the voice command tag you want to play back.

2Select Options > Playback.

CHANGE

1Select Menu > Extras > Voice commands > Audible alerts and the voice command tag you want to change.

2Select Options > Change > Start, then speak the voice tag clearly into the microphone.

DELETE

1Select Menu > Extras > Voice commands > Audible alerts and the voice command tag you want to delete.

2Select Options > Delete > OK.

•AUDIBLE ALERTS

Audible alerts provide you with audible tones to indicate the current signal bar or battery bar strength of your phone. In order to obtain audible alerts, the alerts must first be set up as voice commands. To set up voice commands, see “Add a voice tag” on page 46.

Select and hold Contacts and speak the voice tag clearly into the microphone.

When the phone finds the tag, confirmation appears and the phone plays the recognized voice tag from the phone memory through the earpiece. The phone then beeps to indicate how strong the battery or signal strength is. The following table shows what the number of beeps indicates.

	Audible Alert	One Beep	Two Beeps	Three		Four Beeps
				Beeps
	Battery Bar	Low	Half full	Almost full		Full
	Strength
	Signal Bar	Weak	Somewhat	Almost		Strong
	Strength		strong	strong
Nokia 6010 User Guide			47		Copyright © 2004 Nokia