Hand Held Products 4410 manual Image Capture/Ship and Image Get Commands, Jpeg Image Quality

3F - TIFF Gray scale

4F - Uncompressed Binary

5F - Uncompressed Gray scale

6F - JPEG image

7F - Outlined image

JPEG Image Quality

xJ (x = 1 - 100)

1J = worst quality

100J = best quality

Pixel Depth:Indicates the number of bits.

8D - 8 bit, gray scale image

1D - 1 bit, black and white image

Image Inversion:Used to invert the image in fix mount applications where the imager is mounted upside down.

0I - no inversion, default

1I - inversion

Image Capture/Ship and Image Get Commands

Close Image Capture - IMGCAP

The imager command, IMGCAP, sets up the imager to capture and ship an image the next time the imager’s trigger is pulled. All of the modifiers available for the IMGSHP command (page 7-33) also are available for the IMGCAP command to change the look of the image that is output by the scanner. When using the IMGCAP command, the imager is optimized to capture images of close objects (e.g., signatures, address labels). The default image file format used by IMGCAP is a gray scale KIM.

Far Away Image Capture - IMGGET

The imager command, IMGGET, works the same way as the IMGCAP command, except the imager is set up for capturing images of scenes, similar to a digital camera. The allowable exposure times that the imager uses are longer than those for IMGCAP to account for the fact that the imager’s LEDs have little effect at longer distances. The default image file format used by IMGGET is JPEG.

7 - 34