Load New Imager Software
If you need to upgrade the Imager’s software, you can load a new software file into the Imager’s ROM. Click on Device - Load Firmware File into ROM or click on the lightning flash icon in the button bar.
Flash
icon
You will be prompted for the name of the hex file:
Select the hex file and click on Open. Quick*View will flash the new software into your Imager’s ROM.
Imager Power Settings
By default, the Imager will power down after 2 minutes of inactivity. If you wish to keep the Imager powered up indefinitely, click on Device - Hold Power. To reset the Imager to the default power setting, click on Device - Remove Power Hold.
Trigger Settings
If you wish to control the Imager’s trigger with the software, you can select Device - Trigger On, or Device - Trigger Off. These settings turn the trigger on and off just as if you were holding the trigger or releasing it manually. This feature may be necessary when working with a fixed device that has no trigger.
7 - 14
